New WiFi Password Hacker App for Android

WiFi Hacker for Android

wifi-hacker-for-android-app-reaver

Today we are really excited to tell you about a brand new method to hack WiFi with an Android device.

This App works in a different way to most of the other Apps on our site, in fact it is basically a mobile version of a Linux WiFi password hacker tool, Linux being the king of hacking operating systems.

Have you noticed when looking at all the WiFi networks in range below the network name in brackets ‘WPS available’? WPS stands for ‘Wi-Fi Protected Setup’ and is designed to be a quick and easy way to connect to a WiFi network using an 8 digit PIN, it is also supposed to be more secure, but it isn’t! Cracking an 8 digit PIN (using the numbers 0-9) results in about 100 million combinations, but WPS has a massive flaw, you only need to crack the first 4 digits (10,000 combinations).

OK, so don’t worry, you aren’t going to have to try typing in 10,000 different PIN numbers, the App we are going to tell you about will do that for you! And it doesn’t matter how strong the WiFi password is, WEP, WPA and WPA2, it can crack them all!

So, enough talking, let’s show you how you can using this WiFi password hacker tool on your Android phone or tablet today!

You will need three things:

A Rooted Android device, if your not already Rooted check out our guide here.
bcmon.apk which puts your WiFi card in to monitor mode (same as airmon-ng command in Linux)
RfA App Which you can download here.
You will also need to allow installation of Apps from unknown sources (ie. Apps not from the Google Play Store), to do this go to Settings>Security>Unknown Sources and check the box.

Once you have downloaded and installed both of these Apps open the ‘bcmon’ App to put your WiFi card in to ‘monitor mode’. Then open the ‘RfA’ App and you will be presented with the screen show below, the WiFi networks which can be hacked (with WPS enabled) will be shown in green.

Then just tap on one of the networks with a green tick.

You will then be presented with the screen shown below with lots of options, you can just leave the default settings and press the ‘Start Attack’ button at the bottom.

 

 

 

 

 

 

 

 

The screen should look like the one shown in the picture below which means the attack is working! Now this WiFi hacking tool can take between 2 to 10 hours as it is a brute force attack, so it is probably best to plug your phone in to the charger and let it hack the WiFi network overnight while you sleep and you will wake up with free WiFi!